6 Common Brake Problems and How to Address Them

As your car’s main defense mechanism, brakes are extremely crucial for safe driving. They control your vehicle’s speed and ensure smooth navigation. But, despite being one of the most important elements of an automobile, brakes also tend to cause the most number of issues since they’re in constant use while driving and have to withstand a huge amount of wear and tear.

Moreover, ignoring these problems can have serious outcomes and put you and other drivers at serious risk, which is why it’s so important to carry out regular maintenance and checkups.

In this blog post, we’ll address some common brake problems in Arlington, Stanwood, and nearby locations and the best way to address them. 

Common Problems With Breaks.

1. The Brake Light on the Dashboard Stays On

Have you ever noticed that when you start your car, all the warning lights come on briefly before shutting off? This quick flash is a test to ensure all the bulbs are working properly. 

Leading brake repair experts in Arlington, WA, reveal that if all the bulbs turn on and off as usual, everything is operating as it should. However, your parking brake is likely engaged if the brake light indicator remains illuminated. This light should turn off when you release the parking brake. If it persists, it could indicate a potential issue with your brake system, which should be promptly inspected by credible professionals like Mission Motors.

2. Squeaking Noises While Braking

Generally, brake pads have metallic indicators that become exposed after they’re worn out and are nearing the end of their lifespan. When these metallic indicators touch the rotor while braking, they screech a little to let the driver know it’s time to replace the pads. 

According to the top brake repair specialists in Stanwood, WA, this is one of the most common car braking problems, and it shouldn’t be ignored or taken lightly. If the brake pads wear out entirely, the brake rotor could be damaged, costing you a significant amount of money.

3. Grinding Noises When The Brakes Are Applied

If you hear a loud grinding noise under braking, the simplest explanation is that small stones or gravel are caught in the brake caliper unit. 

Leading brake repair technicians in Arlington, WA, reveal that this can easily be fixed with some compressed air or a pressure washer. It could also indicate that your brake pads are damaged completely, and the sounds are caused by metal grinding against the rotor. Again, if ignored, it can again lead to a very expensive repair job.

4. The Brake Pedal Has Gone Soft

In most cases, the brake pedal offers resistance when you press on it. If your brake pedal feels delicate, soft, or spongy and sinks to the floorboard when pressed, it’s a sign of another potential brake issue, and you should pull over immediately for safety. Your brakes could fail at any moment. 

Top brake repair technicians in Arlington, WA, reveal that the most likely cause is a leak in the master cylinder or somewhere in the brake system. Driving the vehicle in this condition would put you and your passengers at risk.

5. The Vehicle Pulls to One Side Under Braking

When braking, if your vehicle tends to pull to one side, it is most likely due to the calipers’ uneven braking pressure due to rust, dust, or water in the system. 

Top brake repair contractors in Arlington, WA, reveal that you should take your vehicle to a qualified service like Mission Motors to get this checked the moment you notice it. If ignored, it could pull your automobile violently to one side under immediate or hard braking, which can be dangerous to both you and the oncoming traffic.

6. Burning Smell Under Braking

If you notice a strong burning smell when you brake, it might indicate that your brake fluid is beginning to overheat. 

Top brake repair experts in Stanwood, WA, reveal that the best way to prevent this problem is to drive rationally and sensibly. You should use engine braking to your advantage to assist and minimize the load on your brakes. Remember that if your brake fluid reaches its boiling point, your brakes might stop working entirely.

Why Go for Professional Brake Repair?

The only reliable and intelligent solution for dealing with pesky brake problems is seeking the help of a credible brake repair professional in Arlington, Stanwood, WA, and surrounding areas. Some other reasons include,

1. A Faster Turnaround

As mentioned earlier, fixing a problem as serious as damaged brakes requires careful consideration and ample time. A professional brake repair specialist like Mission Motors, with the necessary knowledge and experience, will complete the job quickly and give you a better estimate of the time it will take.

2. Reliable Help

Brake repair mechanics in Arlington, Stanwood, WA, and surrounding locations are valuable because of their credibility, experience, and knowledge. A professional brake repair specialist, such as those at Mission Motors, armed with the necessary knowledge and experience, will promptly resolve the issue. 

3. Ensured Safety

Professional brake repair specialists in Arlington, Stanwood, WA, and nearby areas run diagnostics, tweak, inspect, and repair the brakes until they’re in good shape. Another top reason to hire a professional from Mission Motors is to ensure your safety and the safety of other drivers on the road. You can drive confidently, knowing your brakes are in good working order.

4. Repairs in the Best Setting

A proper repair service like Mission Motors has the latest machinery and technology to guarantee that your brakes get the best care possible. They know how to use these machines and can get your vehicle back on the road with fine-working brakes.

Make an appointment with Mission Motors Today.

If you require assistance or have questions about your car’s brake system, contact the professionals at Mission Motors. Our dedicated team of professionals is here to provide top-rated car and truck repair services to customers throughout Stanwood, Arlington, and Camano Island.

As a local, family-owned business, we understand the importance of having an experienced, trustworthy, and reliable auto repair shop. Our team of qualified mechanics is dedicated to helping our customers get the most out of their vehicles and keep their wheels rolling smoothly on the roads. From routine maintenance to extensive repairs, we have the expertise and skills to get your vehicle back on the road.

Contact us at 360.939.2617 to schedule an appointment with our team today.